Simultaneous improvement of thermal conductivity and mechanical properties for mechanically mixed ABS/h-BN composites by using small amounts of hyperbranched polymer additives

Recently, thermal interface materials (TIMs) are in great demands for modern electronics. For mechanically mixed polymer composite TIMs, the thermal conductivity and the mechanical properties are generally lower than expected values due to the sharply increased viscosity and poor filler dispersion. This work shows that addition of a small amount of polyester-based hyperbranched polymer (HBP) avoided the trade-off in mechanically mixed ABS/hexagonal boron nitride (h-BN) composites. After adding 0.5 wt% HBP, the maximum h-BN content in the composites increased from 50 to 60 wt%. The out-of-plane, in-plane thermal conductivity, and tensile strength of ABS/h-BN with 50 wt% h-BN were 0.408, 0.517 W/mK, and 18 MPa, respectively, and were increased to 0.729, 0.847 W/mK, and 32 MPa by adding 0.5 wt% HBP, while 0.972, 1.12 W/mK, and 29.5 MPa were achieved for ABS/h-BN/HBP with 60 wt% h-BN. The morphological and rheological results proved that these enhancements are due to the improved h-BN dispersion by decreasing viscosity of composites during mixing. Theoretical modeling based on the modified effective medium theory confirmed such results and showed that the interfacial thermal resistance also decreased slightly. Thus, this work demonstrates a facile and scalable method for simultaneously improving the thermal conductivity and mechanical properties of thermoplastic-based TIMs.     

一种模拟量模块的应用

模拟量模块采用RS485通讯网路,将分散的现场数据点的模拟量经AD变换传输到主机或由PC控制远程主站点。模拟量模块具有计量数据采集、测量数据采集、设备开关状态采集和对外逻辑控制等多项功能,主要用作各种测控终端的数据采集、控制和显示设备,适用于各行业的自动化、信息化系统。本文介绍了一种模拟量模块的应用。     

Revealing Electrical-Poling-Induced Polarization Potential in Hybrid Perovskite Photodetectors

Despite recent rapid advances in metal halide perovskites for use in optoelectronics, the fundamental understanding of the electrical-poling-induced ion migration, accounting for many unusual attributes and thus performance in perovskite-based devices, remain comparatively elusive. Herein, the electrical-poling-promoted polarization potential is reported for rendering hybrid organic–inorganic perovskite photodetectors with high photocurrent and fast response time, displaying a tenfold enhancement in the photocurrent and a twofold decrease in the response time after an external electric field poling. First, a robust meniscus-assisted solution-printing strategy is employed to facilitate the oriented perovskite crystals over a large area. Subsequently, the electrical poling invokes the ion migration within perovskite crystals, thus inducing a polarization potential, as substantiated by the surface potential change assessed by Kelvin probe force microscopy. Such electrical-poling-induced polarization potential is responsible for the markedly enhanced photocurrent and largely shortened response time. This work presents new insights into the electrical-poling-triggered ion migration and, in turn, polarization potential as well as into the implication of the latter for optoelectronic devices with greater performance. As such, the utilization of ion-migration-produced polarization potential may represent an important endeavor toward a wide range of high-performance perovskite-based photodetectors, solar cells, transistors, scintillators, etc.     

急性炎性疾病患者乳酸林格氏液液体动力学

目的:探索炎性疾病患者的乳酸林格氏液（Ringer's lactate,RL）液体动力学特征以及炎性生物标记物是否可以作为协变量影响RL分布和排泄。方法:本研究为前瞻性队列研究。选择40例美国麻醉医师分级（ASA）I-II级，腹腔镜下择期胆囊切除术（胆囊炎组，n=20）或者腹腔镜下急诊阑尾切除术（阑尾炎组，n=20）。所有患者麻醉诱导前开始输注RL，按15 mL/kg，35 min内输毕。采用酶联免疫（enzyme-linked immunosorbent assay,ELISA）方法测定血浆炎症（TNF-α,IL-10和CRP）或者内皮损伤生物标记物（syndecan-1,SDC-1）；利用血红蛋白（Hb）稀释-时间曲线和尿量，使用Phoenix软件，采用非线性混合效应模型分析计算RL液体动力学参数和协变量的影响。结果:与胆囊炎组相比，阑尾炎组RL从组织间隙到血浆的转运速率常数（k21）显著降低（14×10-3min-1 versus 35×10-3min-1;P=0.012）。阑尾炎组C反应蛋白（CRP）升高［中位数38.1(1.8-143.6) μg/mL versus 1.3(0.1-159.0) μg/mL;P<0.001］；与清醒状态相比，麻醉期间（输液开始后30～45 min），液体从中央室中到外周室的转运速率常数（k12）显著增加（57×10-3min-1 versus 32×10-3min-1；P<0.01）。清除速率常数（k10）降低90%（0.6×10-3min-1 versus 5.3×10-3min-1;P<0.001）。无论在清醒状态还是麻醉状态下低血压均能降低液体清除；炎症或者内膜损伤的生物标记物不能作为显著影响RL液体动力学参数的协变量。结论:阑尾炎或者胆囊炎患者术前输入液体后“炎症反应的生物标记物”不是RL的液体动力学的协变量，但是两组患者中，全身麻醉期间输入液体的清除率下降。     

A Preamble Re-utilizing Access Scheme for Machine-Type Communications with Optimal Access Class Barring

Wireless Personal Communications - The existing long term evolution networks originally designed for human-to-human communications are hard to tackle numerous and bursty random access requests from...     

B超扫描仪支架五联动滑块机构模具设计

结合B超扫描仪支架塑件的形状特点，通过合理地选择塑件的分型面，简化了塑件的整体结构设计及脱模机构设计。针对塑件上脱模需要的复杂性，设计了一种五滑块联动机构先实施内壁5个倒扣及内壁凹形部位内壁的脱模；而后通过2个斜导柱滑块机构来实施外壁的脱模及侧端的侧孔抽芯脱模，塑件最后由推管顶出来实施最终的完全脱模。配合于脱模机构的动作需要，模架选用三板式模架，模架第一次打开设置用于驱动五滑块联动机构的抽芯动作，第二次打开设置用于驱动外壁及侧端的斜导柱驱动侧滑块机构的抽芯动作。五滑块联动机构设计中，通过一个中央T形槽驱动块，驱动中间过渡滑块，从而通过燕尾槽联结来带动5个成型滑块做内收式抽芯运动，巧妙地解决了塑件上局部区域内设置多个抽芯机构设计空间不够的问题，保证了塑件的自动化注塑生产的可靠实现。     

无线传感器网络中移动sink节点的路径规划

在无线传感器网络中,大量感知数据汇集到sink节点的采集方法会导致sink节点附近的节点能量耗尽,造成能量空洞。针对该问题,利用移动的sink节点进行数据收集是一种解决方法,其中移动sink的路径规划成为一个重要的问题。提出了一个移动sink路径规划算法,将无线传感器中随机分布的节点划分为不同的子区域,寻找sink节点移动的最佳转向点,最终得到最优的移动路径,以实现无线传感器网络生命周期最大化。仿真实验表明,与现有方案相比,该算法能显著延长网络的生命周期。     

“聚龙一号”装置四层圆盘锥磁绝缘传输线的三维粒子模拟研究

介绍了"聚龙一号"中四层圆盘锥磁绝缘传输线(MITL)的基本理论。在CPIPIC平台上,采用非均匀网格和周期性对称边界条件,建立了"聚龙一号"的四层圆盘锥MITL的三维粒子模拟模型。设置相应的参数并用并行算法模拟得到了该器件中各层在绝缘堆上和MITL中间位置的电流和汇流后的电流,并与理论和实验数据进行相互对比验证。模拟结果表明整个器件在达到磁绝缘状态后具有很高的传输效率,并与实验结果相互验证,为以后进一步的研究提供了保证。